T: 01592 611123 E: firstname.lastname@example.org
Hot Water Cylinder Sizes
Determining hot water cylinder sizes is one of the most critical parts in designing efficient hot water systems to ensure they meet the demand.
Over specifying your hot water cylinders will use more energy to heat hot water which simply isn’t required. However, designing cylinders to be too small will inevitably result in a lack of available hot water.
Whilst every project will have its own specific needs, the starting point is to understand what the potential hot water demand is likely to be over the course of a day and at peak periods.
So as a rule of thumb you will use:
- 70-80 litres of hot water to run a bath
- 45 litres of hot water for a 5 minute shower
- 50-100 litres of hot water for a full load in the washing machine12-20 litres of hot water per cycle in the dishwasher
- 0.2 litres of hot water per second when you run the kitchen taps
- 0.15 litres of hot water per second when you run the sink taps
However calculating the optimum size for hot water cylinders isn’t a case of multiplying the above by the number of people in the property.
The main consideration is understanding the peak demands and ensuring you have the right combination of cylinder capacity and re-heat times.
What Size of Hot Water Cylinder Do I Need?
Specifying the size of domestic hot water cylinders and tanks is a little easier to determine as the demand tends to be more predictable.
We recommend sizing the cylinder depending on the number of bedrooms, bathrooms and showers. This should provide a hot water tank which suits the property however our Technical Sales Team can discuss your exact position to provide a degree of flexibility and future proofing.
Indirect hot water cylinders powered by central heating boilers tend to require a smaller capacity due to the fact that a boiler has more power available than a standard 3kW immersion heater. The larger the boiler the quicker the reheat time.
Our general guideline for the sizing of domestic hot water cylinders is therefore as follows:
Indirect Hot Water Cylinders
Direct Hot Water Cylinders
|1 Bedroom + Bath/Shower||75/120||120/150|
|2 Bedroom + Bath/Shower||150||180|
|3 Bedroom + 2 Baths/Shower||180||210|
|4 Bedroom + 2 Baths/Shower||210/250||250/300|
Contact our customer service team on 01592 611123 to discuss your project and let us help you develop the right hot water storage solution for your project.
Thermal Store Hot Water Cylinders Sizing
The above information is designed to provide a general rule of thumb when it comes to the sizing of hot water cylinders. However determining the right thermal stores size fo your property requires a slightly different approach, particularly when there are multiple fuel sources and the thermal store is being used for other purposes such as central and underfloor heating.
As this is a bit more in depth, we have created a dedicated page to provide full details. To find out more, check out our Guide to Thermal Store Cylinder Sizes.
For more advice on Hot Water Cylinder Sizes, call our UK Technical Sales Team now on 01592 611123 or get in touch through our contact page.
You may also be interested in viewing our web pages on:
- Unvented Hot Water Cylinders
- Vented Hot Water Cylinders
- Bespoke Hot Water Cylinders
- Mains Pressure Hot Water Cylinder
McDonald Water Storage: Hot water cylinders and tanks in a variety of sizes for distribution across the UK and Ireland.